| View previous topic :: View next topic |
| Author |
Message |
mnuissl
Joined: 12 Jan 2010
Posts: 19
|
 Posted: Wed Mar 10, 2010 2:45 pm
Post subject: DHCP Issue |
|
|
Could someone give me some info to the following problem:
What could be solution for the following Log??
The FS DHCP Log looks like the following.
10/03/2010 15:39:15 ---> (Run) 1: request received [Wed Mar 10 15:39:15 2010]
10/03/2010 15:39:15 ---> (LookupClientData) Client [00-13-02-2A-74-00] not configured
10/03/2010 15:39:15 ---> (Run) 1: Message type [1], Host name [FSC111218071508]
10/03/2010 15:39:15 ---> (Run) 1: !bClientIsConfigured
10/03/2010 15:39:15 ---> (ObtainPoolIP) 1: Router NOT FOUND
10/03/2010 15:39:15 ---> (Run) 1: Finish..........
10/03/2010 15:39:17 ---> (Run) 2: request received [Wed Mar 10 15:39:17 2010]
10/03/2010 15:39:17 ---> (LookupClientData) Client [00-16-CE-2A-22-63] not configured
10/03/2010 15:39:17 ---> (Run) 2: Message type [1], Host name [aonb160]
10/03/2010 15:39:17 ---> (Run) 2: !bClientIsConfigured
10/03/2010 15:39:17 ---> (ObtainPoolIP) 2: Router NOT FOUND
10/03/2010 15:39:17 ---> (Run) 2: Finish.......... |
|
| Back to top |
|
 |
alan
Forum facilitator
Joined: 26 Sep 2003
Posts: 4435
|
Posted: Wed Mar 10, 2010 2:50 pm
Post subject: |
|
|
Did you encounter any problem (symtoms, please)? Are you using Multiple Network Segments?
_________________
~ Patronsoft Limited ~ |
|
| Back to top |
|
|
mnuissl
Joined: 12 Jan 2010
Posts: 19
|
Posted: Wed Mar 10, 2010 3:29 pm
Post subject: |
|
|
DHCP is now working!
But when i open a webpage by browser its loading and loading.
Then "page can`t be load."
What could be that problem? |
|
| Back to top |
|
|
alan
Forum facilitator
Joined: 26 Sep 2003
Posts: 4435
|
|
| Back to top |
|
|
mnuissl
Joined: 12 Jan 2010
Posts: 19
|
Posted: Thu Mar 11, 2010 8:17 am
Post subject: |
|
|
I checked both, but the problem exists.
The System is a Win XP.
Following is working:
The FS is the DHCP. The Client get a IP off the pool without problems.
When i do a nslookup from the client to a external website, this is working, too.
But the problem is, when i open a website by client nothing comes.
Nothing by IP as link and nothing by domain as link.
When i activated the adminfrontend by guest-net there i can be login.
But from the FS by browser everything can be surfed.
Theres is also a firewall, what ports should be opened?
Dont think that it could be this.
What could be the problem?? |
|
| Back to top |
|
|
alan
Forum facilitator
Joined: 26 Sep 2003
Posts: 4435
|
Posted: Thu Mar 11, 2010 8:42 am
Post subject: |
|
|
You need to simplify your setup. Make sure there is no router/firewall between the client and FirstSpot. Also, check whether there is another DHCP in your network.
Once the client obtain the IP, he should be able to ping FirstSpot Visitor/Private Network Interface IP. This can ensure that you have the physical network setup correctly.
_________________
~ Patronsoft Limited ~ |
|
| Back to top |
|
|
mnuissl
Joined: 12 Jan 2010
Posts: 19
|
Posted: Thu Mar 11, 2010 9:16 am
Post subject: |
|
|
The physical network is correct.
Ping is working! Only the authentication mask doesn`t come.
Before the covert to a VMWare ESX allready works on V5. |
|
| Back to top |
|
|
alan
Forum facilitator
Joined: 26 Sep 2003
Posts: 4435
|
Posted: Thu Mar 11, 2010 9:27 am
Post subject: |
|
|
Most likely you still have offloading problem. Please revisit the first link above and double-check.
_________________
~ Patronsoft Limited ~ |
|
| Back to top |
|
|
mnuissl
Joined: 12 Jan 2010
Posts: 19
|
Posted: Fri Mar 12, 2010 8:39 am
Post subject: |
|
|
Correctly!
The problem was the Offloading.
I must hacked it into the registry. After that and a reboot it works fine. |
|
| Back to top |
|
|
|
Search
Profile
Log in
Register
